Munin: Configure Warnings

image_print
munin-run sensors_volt config
graph_title Voltages
graph_vlabel Volt
graph_args --base 1000 --logarithmic
graph_category sensors
volt1.label Vcore
volt1.warning 0.35:1.39
volt1.critical 0.00:1.74
volt2.label in1
volt2.warning 0.66:0.45
volt2.critical 0.73:0.38
volt3.label AVCC
volt3.warning 2.58:3.50
volt3.critical 2.27:3.81
volt4.label +3.3V
volt4.warning 2.34:3.34
volt4.critical 2.00:3.68
volt5.label in4
volt5.warning 0.12:0.08
volt5.critical 0.13:0.07
volt6.label in5
volt6.warning 1.59:1.17
volt6.critical 1.73:1.03
volt7.label in6
volt7.warning 1.42:0.81
volt7.critical 1.62:0.61
volt8.label 3VSB
volt8.warning 0.36:0.17
volt8.critical 0.42:0.11
volt9.label Vbat
volt9.warning 2.32:2.36
volt9.critical 2.30:2.38
volt10.label cpu0_vid
vi /etc/munin/munin.conf
[localhost.localdomain]
    address 127.0.0.1
    use_node_name yes
    sensors_volt.graph_args --base 1000 -l 0
    sensors_volt.volt1.warning 0:4
    sensors_volt.volt1.critical 0:4
    sensors_volt.volt2.warning 0:4
    sensors_volt.volt2.critical 0:4
    sensors_volt.volt3.warning 0:4
    sensors_volt.volt3.critical 0:4
    sensors_volt.volt4.warning 0:4
    sensors_volt.volt4.critical 0:4
    sensors_volt.volt5.warning 0:4
    sensors_volt.volt5.critical 0:4
    sensors_volt.volt6.warning 0:4
    sensors_volt.volt6.critical 0:4
    sensors_volt.volt7.warning 0:4
    sensors_volt.volt7.critical 0:4
    sensors_volt.volt8.warning 0:4
    sensors_volt.volt8.critical 0:4
    sensors_volt.volt9.warning 0:4
    sensors_volt.volt9.critical 0:4
    sensors_fan.fan1.warning 0:3000
    sensors_fan.fan1.critical 0:3000
    sensors_fan.fan2.warning 0:3000
    sensors_fan.fan2.critical 0:3000
    sensors_fan.fan3.warning 0:3000
    sensors_fan.fan3.critical 0:3000
    sensors_fan.fan4.warning 0:3000
    sensors_fan.fan4.critical 0:3000
    sensors_fan.fan5.warning 0:3000
    sensors_fan.fan5.critical 0:3000
service munin-node restart